How To Install Cd Drive In Computer

Steps Download Article

1

Read the manual that came with your computer and be sure that you lot desire to employ the CD/DVD drive.
2

Wear an anti-static wrist ring or affect unpainted metal to discharge static electricity.

Advertizing
3

Turn off and unplug the computer.
4

Open the estimator case.
5

Expect for the existing CD/DVD drive and unplug the power and data cables.
6

Remove the screws from the CD/DVD drive and and so remove it from the chassis.
seven

If you want to install another optical drive, remove the drive bay encompass.
viii
Adjust the jumpers on the dorsum of the drive. Well-nigh drives utilise "Master" as the default setting.
- If the CD/DVD drive will be an extra one, prepare the jumper setting to "Slave".
9

Slide the CD/DVD drive into the drive bay on the computer.
10

Move the cables back, but do non disconnect them.
11
Connect the data and power cables to the CD/DVD drive.
- For IDE drives, marshal pivot 1 (the red edge) to the connector on the CD/DVD drive. Then connect the 4-pivot ability connector to the drive.
- For SATA drives, align the notch to the connector on the drive. Then connect the SATA power connector (the long i) to the bulldoze.
- If there is lilliputian space, connect the cable earlier fully securing the drive into the bay.
12
Connect the audio cablevision to the drive.
- Information technology runs from the drive'southward audio-out pins to the CD-IN connector on your sound carte du jour.
thirteen

Close the figurer case.
14
Plow on the figurer. Your computer's BIOS should recognize the new CD/DVD drive.
- Windows will install the drivers required for the functioning of the new CD/DVD drive.
- Open My Reckoner and y'all will see the drive.
Advertisement

Add New Question

Question

I am trying to install a library cd-rom for research. Ii days ago I returned my ASUS laptop to factory settings, but kept all the files. Now the computer will not even register that I have put the disc in. What can I do?

Reset the BIOS to default, and then reboot. Information technology's a common problem, that should fix it.
Question

How do I play a CD in it after it's installed?

Assuming the installation went well, it's very uncomplicated. Open the drive, put the CD in the drive, close the drive, and play the CD with the media player application of your selection.
Question

Why won't my reckoner detect the CD bulldoze?

It could exist a number of things, but some steps to endeavor are rebooting your system fully (as in a full shutdown and and then back on) and checking your cables.
Question

What should I do if my CD ROM drive is non responding?

Aditya Telang

Community Answer

Open up your arrangement and cheque the cable connection. Remove and bank check for aptitude or damaged connections, both on cable, motherboard and the bulldoze. If all those are okay, switch on your arrangement and check for corrupted or missing drivers. If all these are OK, either the electric components on the drive or the motherboard take failed. In rare cases, it can be low powered PSU.
Question

How do I install a program from a CD?

If the CD doesn't automatically run a program, yous can try double-clicking on the CD in File Explorer to run it. If it opens up a new directory (folder), and so expect for a programme within that is an installer.
Question

I cannot find how to insert a CD.

Slide the disc right side up into the slot. If it is an older disk drive, press the push, put the disc on the platform, and slide it in.
Question

I installed a DVD ROM but l tin can't meet the DVD or RAM. What could the problem be?

Rudy Toth

Customs Answer

Information technology used to be PNP. But, now y'all will need software to run that DVD ROM bulldoze and these also have special files, known as Codecs, to run the video on your computer.